Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Program Files\direwolf-1.7.0a>.\direwolf.exe -d a
Dire Wolf DEVELOPMENT version 1.7 A (Mar 15 2021)
Includes optional support for:  cm108-ptt

Reading config file direwolf.conf
Available audio input devices for receive (*=selected):
    0: Microphone (High Definition Aud
    1: Microphone (HD Webcam C615)
    2: Line In (High Definition Audio
 *  3: Microphone (2- USB PnP Sound De   (channel 0)
    4: Digital Audio (S/PDIF) (High De
Available audio output devices for transmit (*=selected):
    0: Speakers (High Definition Audio
 *  1: Speakers (2- USB PnP Sound Devi   (channel 0)
    2: Digital Audio (S/PDIF) (High De
Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate.
Using \\?\hid#vid_0d8c&pid_013a&mi_03#8&1d2139&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} GPIO 3 for channel 0 PTT control.
Ready to accept AGW client application 0 on port 8000 ...
Ready to accept KISS TCP client application 0 on port 8001 ...
Ready to accept KISS TCP client application 0 on port 8100 ...

Attached to AGW client application 0 ...

Ready to accept AGW client application 1 on port 8000 ...

<<< Register CallSign from AGWPE client application 0, total length = 36
        portx = 0, datakind = 'X', pid = 0x00
        call_from = "W6JMK", call_to = ""
        data_len = 0, user_reserved = 0, data =

>>> Callsign Registration to AGWPE client application 0, total length = 37
        portx = 0, datakind = 'X', pid = 0x00
        call_from = "W6JMK", call_to = ""
        data_len = 1, user_reserved = 0, data =
  000:  01                                               .

<<< Ask Port Information from AGWPE client application 0, total length = 36
        portx = 0, datakind = 'G', pid = 0x00
        call_from = "", call_to = ""
        data_len = 0, user_reserved = 0, data =

>>> Port Information to AGWPE client application 0, total length = 176
        portx = 0, datakind = 'G', pid = 0x00
        call_from = "", call_to = ""
        data_len = 140, user_reserved = 0, data =
  000:  31 3b 50 6f 72 74 31 20 66 69 72 73 74 20 73 6f  1;Port1 first so
  010:  75 6e 64 63 61 72 64 20 6d 6f 6e 6f 3b 50 6f 72  undcard mono;Por
  020:  74 32 20 49 4e 56 41 4c 49 44 20 43 48 41 4e 4e  t2 INVALID CHANN
  030:  45 4c 3b 50 6f 72 74 33 20 49 4e 56 41 4c 49 44  EL;Port3 INVALID
  040:  20 43 48 41 4e 4e 45 4c 3b 50 6f 72 74 34 20 49   CHANNEL;Port4 I
  050:  4e 56 41 4c 49 44 20 43 48 41 4e 4e 45 4c 3b 50  NVALID CHANNEL;P
  060:  6f 72 74 35 20 49 4e 56 41 4c 49 44 20 43 48 41  ort5 INVALID CHA
  070:  4e 4e 45 4c 3b 50 6f 72 74 36 20 49 4e 56 41 4c  NNEL;Port6 INVAL
  080:  49 44 20 43 48 41 4e 4e 45 4c 3b 00              ID CHANNEL;.

<<< Connect, Start an AX.25 Connection from AGWPE client application 0, total length = 36
        portx = 0, datakind = 'C', pid = 0xf0
        call_from = "W6JMK", call_to = ""
        data_len = 0, user_reserved = 0, data =
Attempting connect to  ...
Destination Address "" is empty.
Internal error in ax25_u_frame_debug: Could not set addresses for U frame.
INTERNAL ERROR:  lm_data_request NULL packet pointer. Please report this!